Frequently Asked Questions

Yes. Stock flasher relays are designed to blink twice as fast as normal when a bulb is burned out — to alert the rider. Because LEDs consume so little power, the stock relay reads them as "burned out" and blinks fast.

Two options:

• Recommended: replace the OEM flasher relay with one of our Electronic LED Flasher Relays — designed to blink at normal speed with LEDs, incandescents, or any combination.
• Alternative: use a Load Equalizer to correct blink speed.

No, it will not harm the bike in any way.

If the total power consumed by the blinkers drops too low, the stock flasher relay can fall below a threshold and stop blinking entirely. Fix: replace the flasher relay with one that has no minimum-load requirement (e.g. a Custom LED Electronic LED Flasher Relay), or — if your bike has no replaceable relay — use a Custom LED Load Equalizer.

Replacing the factory flasher relay is almost always the best solution. The Custom LED Electronic LED Flasher Relay is the cleanest fix for any bike with a compatible (2- or 3-wire) flasher relay — corrects blink rate without wasting power, and costs half as much as a pair of 25W Load Equalizers.

For motorcycles without a compatible flasher relay, the Custom LED 25 Watt Load Equalizer is the go-to solution.

One flasher relay per motorcycle.

No. None of our products have been submitted for DOT approval (this is not to say they would be rejected). Our products are designed and manufactured for off-road use only. There is no such thing as a DOT-approved integrated LED tail light, due to DOT requirements for blinker positioning.

We pride ourselves on fast order processing. Our shipping cut-off is 12:00 noon Eastern Time. Non-custom orders received before the cut-off on business days ship same-day. Business days are Mon–Fri, excluding postal holidays.

USPS for most domestic orders, UPS for larger or expedited shipments, and DHL for international. See our full shipping methods page for details. For products sold through our dealer network, please contact the dealer directly about their shipping methods.

At Custom LED, customer service is a top priority. The owner — and designer of our products — answers the phone and all emails, always. Outside normal hours we strive to answer emails within 24 hours. Phone calls forward to personal phones after-hours; leave a voicemail and we'll return your call quickly.

See our policies page for full warranty, return, shipping, and privacy policies — all in one place.

Yes. If your item falls outside our warranty policy or has been damaged unintentionally, Custom LED offers repair/refurbish services for most products. A full tail-light refurbish includes a new harness, lens, housing, and a careful inspection & repair of the circuit board if needed.

Call PayPal Merchant Solutions at 888-215-5506. PayPal uses fraud-detection algorithms that occasionally flag legitimate transactions; confirming you're the cardholder and intend to make the purchase typically clears the block.